>What is your application??
well, initially just testing, and maybe an air ionizer (negative
ions), my thought block diagram is like this: first a compressor or
fan to send air thru a pipe, inside this pipe there are a conductive
grid covering all its cross section (someone here recommended me to
use steel wool), and to this grid is connected the HV source, so my
only problem is to have the suitable HV source for me (small, simple
and ideally motionless to avoid problems associated with mechanisms ).
Theorically air must come out from the pipe negative ionized .
>Domestic ion generators do not work in dry air.
=BFIs this because moist air is easier to ionize than dry air and
ionizer can use a lower ionization voltage?
I have another question (half OT) =BFwhere can I find a schematic of a
hand buzzer, that think what shocks a victim when gives a handshake to
prankster? =BFwhich is its output voltage? =BFwhy am I asking this?,
it=B4s=
just because I think that circuit can be useful as HV source, or at
least as a base circuit for a HV source, =BFor am I wrong?
|
